Manual transmissions in modern passenger cars use synchronizers, or synchros, to eliminate the need for double-clutching. A synchro's purpose is to allow the collar and the gear to make frictional contact before the dog teeth make contact. This lets the collar and the gear synchronize their speeds before the teeth need to engage, like this. Commercial Walk-Behind Mower Fixed Deck, T-Bar, Gear Drive with 32in or 36in Cutting Unit. This manual identifies potential hazards and has safety messages identified by the safety-alert symbol. Shift the transmission into first gear to drive the machine. Drive machine until the caster wheels contact the curb (Figure 10).
The 18 speed transmission is strong, versatile and easy to use, once you get the hang of the pattern and if you are experienced with manual transmissions.
It’s not the easiest of transmissions if you are just starting to learn to drive a tractor trailer.
Versatility is the best feature of the 18 speed. The driver can always have the right gear to keep the truck engine running at the correct RPM to save fuel and help the truck engine last.
For most truck drivers, the 18 speed transmission has more gears than you’ll ever need to use, unless perhaps you’re pulling trains in the mountains or heavy weight.
![Interactive manual transmission tutorial Interactive manual transmission tutorial](http://1.bp.blogspot.com/-bdlY8uioCNU/Uic_zDArhKI/AAAAAAAAFSo/6J2PKyH9KFc/s1600/287795-m.jpg)
There’s a gear for all situations a driver might encounter.
Shift Pattern For an 18 Speed
The 18 speed transmission is laid out in an ‘H’ pattern. The easiest way to become familiar with the 18 speed is to practice shifting in an H pattern.
- The driver uses second, third, fourth, and fifth, then splits up into high range. Then, shift the H pattern again for sixth, seventh, eighth and ninth gear.
- After reaching ninth gear, split up to overdrive for the top gear.
There are plenty of other gears in between, as all main gears have a high range and low range, so that the driver can split any of the gears, twice more.
It might sound a bit complicated at first, but it’s really not.
The more a driver practices, and the more experience he gains, he may find that the gear being used, may not be quite the right one for where he wants the RPM’S to be.
In that case, they can be split up or down accordingly, matching the RPM’S to the engine’s sweet spot.
Drivers who like floating gears should like the 18 speed, as 12 of the 18 gears available do not require moving the shifter, as they are split gears.
Related > How to Float Gears in a Semi Truck
Steps to Shifting an 18 Speed Transmission
The 18 speed transmission is laid out in an ‘H’ pattern. The easiest way to become familiar with the 18 speed is to practice shifting in an H pattern.
- The driver uses second, third, fourth, and fifth, then splits up into high range and then shift the H pattern again for sixth, seventh, eighth and ninth gear.
- After reaching ninth gear, split up to overdrive for the top gear.
Related >5 Tips For Truckers For Effective Use of Cruise Control
There are plenty of other gears in between. The main gears have a high range and low range which results that the driver can split any of the gears, twice more.
It might sound a bit complicated at first however it’s really not. The more the driver practices, and the more experience he gains, he may find that at the gear being used, may not be quite the right one for where he wants the RPM’S to be.
In that case, they can be split up or down accordingly, matching the RPM’S to the engine’s sweet spot.
Drivers who like floating gears should like the 18 speed because 12 of the 18 gears available do not require moving the shifter. These gears are split gears.
Related > How to Handle a Jack Knife Skid
Shifting Tips
- Shifting properly is kind of like riding a bike. The more you practice, the better you’ll get at it.
- You can have two trucks, identically spec’ed and they’ll shift differently. Every truck shifts a little differently, they each have their own personality.
- Just take the time to get to know what your truck likes. Find where the sweet spots are.
- Shifting should be done slowly and methodically. Feather the clutch and feather the fuel to help slide it into gear.
- Never try to force a gear. It isn’t necessary. It will slide in virtually on its own if everything is lined up right, the speed and the RPM and the shifter.
- Relax. It’s not something to be rushed. Practice, practice, practice.
- 18 Speed Transmission Shift Pattern Diagram
This is a very simple basic diagram of the shifting pattern of an 18 speed transmission. This is the best way to understand the positioning of all 18 gears.
3 reverse gears — Why anyone would want or need 3 different speeds in reverse is beyond me. But, the with 18 speed transmission, there are 3 reverse speeds.
3 LO gears (1,2,3) — There may be times when you’re trying to lift a heavy load from a dead stop, or trying to get a set of loaded B trains going from a dead stop after chaining up on a grade. In this situation, the 3 low forward starting gears of the 18 speed, are just the ticket to a smooth start. It’s easy to get a heavy load rolling without abusing the clutch.
15 forward gears — in 3 H patterns.
For the average driver, many of these gears will never be used. It depends on the weight of the load, terrain and several other factors.
SUMMARY
REMEMBER: Learning to shift an 18 speed transmission pattern is not difficult, but it does take some practice time to shift smoothly.
Practice. Practice. And then practice some more.
HERE’S THE COMPLETE VERSION OF THE VIDEO VERSION OF THIS ARTICLE ON YOUTUBE!
Related Articles
- How to Use the Jake Brake Effectively